ADT R56SF 4.0 M.2 Key A.E to Mini PCIe Extension Cable PCIe 3.0/4.0 x1 Custom Length EMI Shielded Flat Ribbon Cable

Top Bullet Points

✅ ADT Factory Direct | 100% Power-On Full Inspection Before Shipment
✅ PCIe 3.0 / PCIe 4.0 x1, Stable 8Gbps Signal Transmission
✅ 4th Gen ADT Self-developed EMI Shielded High-Speed Flat Cable
✅ Custom Length Available: 5~100cm (3cm ~100cm custom order)
✅ No-Via Differential Signal PCB Design, Anti-CAF Micro-Short
✅ High-TG 1oz Thick Copper PCB, Heavy Gold Plated Gold Fingers
✅ Reinforced Soldering Joints, Tear-resistant & Anti-interference
✅ For Mini PCIe WiFi Card to M.2 WiFi A.E Motherboard Port

Full Product Description

Brand: ADT ElectronicsModel: R56SF 4.0Product Name: M.2 Key A.E to Mini PCIe Connection CableCable Length: 5cm -100cm (Custom length available)Bandwidth: PCIe 3.0 / 4.0 x1Function: Extend Mini-PCIe wireless network card and connect it to motherboard M.2 WiFi A.E port

⚠️ IMPORTANT PURCHASE DISCLAIMERThis item is for purchase by professional engineers for designated hardware testing purposes ONLY. It is NOT suitable for general consumer use. General buyers please DO NOT purchase this product.This is a custom-made product, non-refundable and non-returnable. Please fully verify compatibility before placing your order.

💡 Procurement TipWe strongly recommend purchasing 1~2 samples for testing and validation before bulk ordering.Many compatibility risks exist. Improper assembly or operation may burn your hardware.

Product Advantages

1. High-Speed Shielded CableADT self-developed 4th generation shielded high-speed flat cable with premium quality connectors. Supports stable PCIe 4.0 x1 8Gbps high-frequency signal transmission.
2. Customizable Cable LengthCustom lengths from 3cm up to 100cm are supported. Our low-impedance ribbon cable maintains full PCIe4.0 speed stably within 60cm.
3. Differential Signal No-Via PCB DesignNo through vias on differential signal traces. Eliminates signal attenuation caused by parasitic capacitance and inductance. Prevents CAF conductive anodic filament micro-short faults for long service life.
4. High-Performance Precision PCBPCB uses high-frequency low-loss high-TG substrate. Copper foil thickness increased to 1oz. Gold fingers with sufficient gold plating for superior conductivity. Reduces system crash and audio distortion caused by oxidation and rising impedance.
5. Heavy-Duty Reinforced Structure3mm thick PCB gaskets protect soldering joints. Secured with screws and hex lock nuts. Robust, tensile-resistant and anti-interference. Avoids broken wires and pin detachment.
6. Optimized PCB Form FactorSlim PCB design will not block graphics cards. Widened & lengthened PCB layout simplifies installation and lowers risk of physical damage.

FAQ

Q: What about cable quality? Does it have shielding?A: Yes, built-in metal shielding layer with advanced EMI shielding conductive polymer for flat ribbon cable.This technology fully covers the flat cable with conductive polymer EMI shielding layer, blocks incoming and outgoing electromagnetic radiation, minimizes interference and performance degradation while reducing cable weight.

Q: Cable thickness? Is it flexible and bendable?A: Cable thickness is only 1.3mm. It is soft and flexible. Bending the cable will not affect normal performance.

Length Note:Listed cable length only refers to the flexible ribbon part, excluding PCB boards and connectors. Please refer to dimension diagram for reference.

Important Purchase & Installation Notes

1. Correct Orientation RequiredAlways confirm the direction before plugging in. Reverse or offset insertion may burn your hardware. Hold the device socket firmly when inserting the cable, do not apply excessive force to avoid breaking socket pins.Do NOT bend or pull the cable within 2cm of soldering joints on both ends.
2. Signal driving capability varies between motherboards and hardware devices. Our internal lab test results may not match your hardware performance. Signal loss is inevitable with extension cables. Do not buy if you require zero signal loss.
3. Motherboards and adapters will oxidate and degrade over time. Using extension cables will further reduce system stability.Devices older than 4 years are NOT supported, please do not purchase.
4. Sold only for designated hardware testing by professional engineers. Not approved for other applications.