New, missing original packaging.
Free shipping via USPS Ground service.

“Product description and/or information was obtained through a Google Lens image search. Please review photos and verify compatibility before purchase”.

Please review all photos; you will receive exactly what you see, no more, no less.

Manual not included, but it can be downloaded from the Internet.

EDUP Gigabit PoE Power Kit

Includes:

• EDUP EP-SK0013-2 150W GigE PoE Injector
• EDUP EP-SK0076 100W Gigabit PoE Splitter

This EDUP PoE (Power over Ethernet) kit is designed for applications requiring both high-speed Gigabit Ethernet data transmission and remote power delivery over a single network cable. The injector combines DC power with Ethernet data, while the splitter separates the power and data at the remote device. The kit is commonly used with Starlink Mini installations, wireless networking equipment, surveillance systems, remote communication devices, and other PoE-powered applications. runs up to 100 meters.

• Compatible with numerous passive PoE applications. while preserving Gigabit Ethernet performance. Operating Humidity | 10–90% Non-Condensing |

Long-range operation up to 100 meters. )

Additional Technical Specifications

EDUP EP-SK0013-2 150W Gigabit PoE Injector + EDUP EP-SK0076 100W Gigabit PoE Splitter

These two devices are designed to operate as a matched injector/splitter pair, commonly used for powering remote networking equipment such as Starlink Mini systems over a single Ethernet cable.

SpecificationEP-SK0013-2 PoE InjectorEP-SK0076 PoE SplitterManufacturerEDUPEDUPModel NumberEP-SK0013-2EP-SK0076Device TypePassive Gigabit PoE InjectorIsolated Gigabit PoE SplitterEthernet Speed10/100/1000 Mbps10/100/1000 MbpsMaximum Power150 W100 WPoE MethodPassive PoEPassive PoEInput Voltage48–57 VDC37–52 VDC via PoEOutput VoltagePoE output on RJ4548 VDC, 2.5 A maxMaximum Current3 A2.5 ATransmission DistanceUp to 100 m (328 ft)Up to 100 m (328 ft)Ethernet CableCat5e or higherCat5e or higherOperating Temperature-20°C to +55°C-25°C to +70°CStorage Temperature-40°C to +70°C-40°C to +80°COperating Humidity10–90% RH, non-condensing10–90% RH, non-condensingData ModeFull & Half DuplexFull & Half Duplex

PoE Pinout Configuration

Both units use a non-standard passive PoE configuration:

PinsFunction1, 2, 3, 6Positive (+V)4, 5, 7, 8Negative (-V)

This configuration differs from standard IEEE 802.3af/at/bt auto-negotiating PoE systems and is intended to be used as a matched injector/splitter set.

Interface DetailsEP-SK0013-2 Injector

• 1 × Gigabit LAN/Data port
• 1 × Gigabit PoE output port
• DC power input
• Plug-and-play operation
• No software configuration required
• Supports simultaneous power and data transmission over one Ethernet cable.

EP-SK0076 Splitter

• 1 × RJ45 PoE input
• 1 × RJ45 Gigabit data output
• 1 × DC barrel power output (5.5 mm × 2.1 mm)
• Internal isolation circuitry
• Designed to separate data and power at the remote device.

Electrical Protection

The injector incorporates:

• Surge protection: ±8 kV differential mode
• ESD protection: ±8 kV contact discharge
• ESD protection: ±15 kV air discharge
• Grounding provisions for improved signal integrity

These protections help guard connected equipment against static discharge and transient voltage events.

Mechanical MaterialABS/Engineering PlasticMountingDesktop or wall-mountColorBlackCoolingPassive convectionStatus LEDsNot present on some versions

Compatible Applications

• Starlink Mini
• Starlink Mini X
• Remote wireless bridges
• Outdoor networking devices
• Surveillance cameras requiring separated DC power
• Mobile/RV internet installations
• Marine networking systems
• Off-grid communication systems

Compatibility depends on the voltage and pinout requirements of the powered device.

Country of Origin

The manufacturer, EDUP (Shenzhen Edup Electronics Technology Co., Ltd.), lists the country of origin for the EP-SK0076 and related injector products as:

China (Guangdong Province, Shenzhen).

For retail-packaged units, the product label will typically state:

"Made in China" or "Manufactured in Shenzhen, Guangdong, China."

Package Contents

• 1 × EDUP EP-SK0013-2 150W Gigabit PoE Injector
• 1 × EDUP EP-SK0076 100W Gigabit PoE Splitter

Together, these components provide a complete solution for extending both Gigabit Ethernet data and up to 100W of usable DC power to remote equipment over a single Cat5e/Cat6 cable run of up to 100 meters.