High Quality10M/100M/1000MGigabit Ethernetto Fiber optic transceiver media converter,1Pair(A/B)

Model: HTB-4100A/B-60km

Gigabit/60KM transmissiondistance/ SC fiber

High performance & Highquality & Great deal & Big saving!

Don’t hesitate to buy onepair for testing, I believe you will buy more!

Overview

Fiber optic transceiveris a computer network used to convert electrical signals into optical signalsof the optical signal converter, which is characterized by an optical fiber canonly transmit and receive optical signals simultaneously.

HTB-GS-03 is a 10M/100M/ 1000M adaptiveoptical transceivers, it is fully compliant with IEEE802.3 10BaseT, IEEE802.3u1000BaseTX, 1000Base-FX standard. And has passed the Ministry of InformationIndustry telecommunications equipment Jinwangjiance, all technical indicatorsall meet the network standards.

Product isstable and reliable performance, the design conforms to the Ethernet standard,and lightning protection. Especially suitable for telecommunications, cabletelevision, railways, military, financial, securities, customs, civil aviation,maritime transport, electricity, water, and oil and various broadband datanetworks and require high reliability of data transfer or set up special areasof IP data transmission network. Campus broadband network, broadband cablenetworks and intelligent residential broadband fiber to the building, fiber tothe home of the best applications.

Installation

Please follow the steps below to installdual-fiber bi-directional fiber optic transceivers:

1. The fiber optic jumpers or pigtail fiberoptic terminal box from the same fiber ends are connected to the peer SC fiberoptic transceiver port.

2. The UTP patch cord from the networkdevice to the transceiver RJ45 interface, this transceiver electrical interfacecan adaptively direct line or cross the line.

3. The power adapter is connected to the DCplug fiber optic transceiver DC socket, AC power adapter and then plug into anAC outlet, power, then fiber optic transceiver POWER lights, other lights flashin sequence to press the self-test bright, self-test after the completion offiber optic transceivers based on the detected electrical network devices withdocking port status to determine the transceiver electrical interface workingcondition. If you can not detect a docking device (such as docking device isnot on, etc.), state transceiver electrical interface is adaptive, that isuncertain, so the TX LINK and TX 1000 lights are off. The fiber optic portsince it has been set to 1000 full-duplex mode, so FX 1000 and FX FDX LED willlight up.

LEDindicator

Dual-fiber offerirectionaltransceivers have six LED indicators that show the working status of thetransceiver, based on LED shown, can determine the transceiver is workingproperly and there may be a problem, which can help locate the fault. Theirrole are as follows:

1.PWR: light indicates DC5V poweradapter is working properly;

2.FX 1000: light indicates fibertransmission rate is 1000Mbps;

3.FX Link / Act: Steady lightindicates fiber link is connected properly; lights flashing, said optical fiberdata transmission;

4.Fdx: light indicates data infull-duplex mode fiber transmission;

5.TX 100: light indicates twistedpair transmission rate is 1000Mbps;

6.Lamp is not lit, said twistedpair transmission rate is 10Mbps;

7.TX Link / Act: Steady lightindicates UTP link is properly connected; lamp flashes for the twisted pairdata transmission.

Fiberoptic parameters

HTB-4100A/B-60km

1.SC fiber optic connector

2.Single-fiber single-modeoptical fiber type

3.Center wavelength of 1550nm

4.Transmission distance of 60 km

5.The minimum transmission power-16.0dBm

6.Maximum transmit power -8.0dBm

7.Receiver sensitivity <-30dBm

8.Allow link loss 14.0dBm

Technicalparameters

1.Standard: IEEE 802.3 10BaseT,IEEE 802.3u

2.1000Base-TX, 1000Base-FX

3.Interface: UTP: RJ45

4.Fiber: single-mode SC

5.LED: PWR, FX 1000, FX Link /Act,

6.FDX, TX 1000, TX Link / Act

7.Transfer rate: twisted: 10Mbps,100Mbps, 1000Mbps

8.Fiber: 1000Mbps

9.UTP: Category 5, 5E class

10.Fiber: 9/125 & micro; m

11.Single mode: 8 / 125,8.3 /125,8.7 / 125,9 / 125 & micro; m

12.Power: AC 220V (165-260V), 50Hz

13.DC: 5V, 1A

14.Ambient temperature: 0 ~ 50 ℃

15.Storage temperature: -20 ~ 70 ℃

16.Humidity: 5% ~ 90%

17.Volume: 26 × 70 × 94mm (height× width × length)

Belowitems list we also sold 20Km/40Km/80Km/100Km for choice, search our store or contactus!

Shipping :We Ship to Worldwide, the items will be shipped within 1~2 business day after your full payment !We ship it by EMS , FedEx,DHL as agreed.

Payment : paypal,T/T

ReturnPolicy:

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.

WarrantyandGuarantee:

1.One yearWarranty, Buy with confidence!

OtherPolicies:

4.SeriousBuyerOnly! style="margin: 0px; padding: 0px; border: 0px; font: inherit; vertical-align: baseline; font-family: Arial, Helvetica, sans-senif, SimSun, 宋体; line-height: 18px; background-color: rgb(255, 255, 255); ">

About us:

1. Welcome to our store! We are a professional worldwide wholesale and retails company. High product quality, reasonable prices, excellent customer service and a reliable credit standing is our tenet.

2. We maintain high standards of excellence and strive for 100% customer satisfaction! response is very important to us. We request that you contact us immediately BEFORE you give us negative of neural response, so that we can satisfactorily address your concerns.