ESP32 module:
802.11b/g/WiFi + BT module
Low power dual core 32-bit CPU, which can be used as application processor
The main frequency is up to 240MHz, and the operation capacity is up to 600DMIPS
Support UART / SPI / I2C / PWM / DAC / ADC and other interfaces
Support openOCD debugging interface
It supports multiple sleep modes, and the current reaches 6.5ua in deep sleep
Embedded LwIP and FreeRTOS
Support STA/AP/STA+AP mode
Support Smart Config / Airkiss one key distribution network
ESP-32 module, and the peripheral uses the USB serial port chip CP2102 to expand the type c interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable
It has power indicator (red light) and working status indicator (blue light) on it, so you can know the status of the module at any time
There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode.
In addition, the pins on both sides of the development board are convenient for developers to connect and use
The module has powerful Bluetooth-compatible and WiFi functions. As a Bluetooth-compatible and WiFi development board
In addition, the module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development.
It can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal, etc
The esp32 breakout board can expand one GPIO pin of esp32 development board to two.Convenient to reuse all pins in smart home DIY projects. Great breadboard alternative
The expansion board is a double-layer board. One pin is wired on both sides.
Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission
These boards fit the 30 pin ESP32
Package include:
2 x ESP32 30pin development board
2 x ESP32 30pin expansion board
ESP-32 is a powerful WiFi-BT-BLE MCU module suitable for various applications, compatible with low-power sensor networks to the most demanding tasks like voice coding, music streaming, and MP3 decoding.
ESP32 module a standard 30 Pin interface design, making it easy for users to apply ESP32 chips across different applications and projects, offers high-performance capabilities, multi-functionality, and strong usability for various IoT application scenarios
The expansion board features a two-layer design with a single pin on each side, providing stable and reliable contact and signal transmission for your ESP32 board. This design ensures that data transfer is consistent and reliable, even under tough conditions.
The splitter board allows you to expand one GPIO pin of your ESP32 development board into two, making it a good tool for your smart home project. With this board, you can reuse all of your pins without sacrificing performance, making it an excellent alternative to other options on the market
The ESP32 module is a versatile WiFi+BT+BLE MCU module that supports both low-power Bluetooth-compatible and WiFi connectivity, providing wide application potential.
