ADT R58SK PCIe 4.0 Gen4 M.2 Key A.E WiFi to PCI-E X8 Riser Extension Cable 8Gbps Custom Length 3cm~100cm
Overview
ADT factory direct sale. Every unit goes through 100% full power-on inspection before shipment for reliable performance and great response.
- Brand: ADT
- Model: R58SK (R58 Series)
- Product: M.2 Key A.E WiFi interface to PCI-E X8 Riser Extension Cable
- Cable Length: 3cm to 100cm (custom length available)
- Bandwidth: PCIe4.0 x1 Gen4, 8Gbps
- Function: Use this riser extension cable to connect PCIe 8x SSD storage card to the motherboard M.2 WiFi slot
Important Purchase Restriction: This item is intended for purchase by professional engineers only. It is NOT suitable for general use. Ordinary buyers please DO NOT purchase.Sourcing Notice: Please order 1~2 samples for testing and verification before bulk purchasing.Warm Warning: This product has many compatibility concerns. Incorrect assembly or improper operation may burn out your hardware. This custom item is non-refundable and non-returnable. Please fully confirm before checkout.
Length Note: The listed cable length refers only to the flexible cable section, excluding PCBs and connectors. Add around 4cm if PCB and connectors are included. For example, a 5cm cable has a total overall length of roughly 9cm including boards.
Product Advantages
- High-performance Shielded Cable: ADT self-developed 4th generation high-speed shielded cable with premium connectors. Stable PCIe 4.0 x1 8Gbps high-frequency data transmission.
- Customizable Cable Length: Custom orders accepted from 3cm up to 1 meter. Low impedance cable maintains full PCIe4.0 speed stably for lengths up to 60cm.
- Via-less Differential Signal Design: Eliminates signal attenuation and interference caused by parasitic capacitance and inductance, prevents CAF micro-short issues for long service life.
- High-quality PCB: High-frequency low-resistance PCB material with high TG substrate. 1oz thick copper traces, sufficient gold plating on edge contacts for excellent conductivity. Reduces crashes and signal distortion caused by oxidation and rising contact resistance.
- Robust Mechanical Structure: 3mm thick PCB gaskets protect metal soldering joints, secured with screws and hex lock nuts. Strong tensile resistance, anti-interference, prevents broken wires and pad lifting.
- Low-profile & Reinforced PCB Design: Low-profile PCB avoids GPU blocking; extended reinforced board design simplifies installation and reduces damage risk.
FAQQ: What is the cable quality? Does it have shielding?
A: It features metal layer shielding with advanced EMI shielding conductive polymer material for flat ribbon cable. This technology fully covers each cable with conductive polymer EMI shielding. It blocks incoming and outgoing electromagnetic radiation, minimizes interference and performance degradation while keeping the cable lightweight.
Q: Cable thickness? Is it flexible? Can it bend?
A: Cable thickness is only 1.3mm. The cable is soft and flexible. Bending will not affect normal usage.
Purchase Notes
- Correct Orientation Required: Check pin direction carefully before plugging. Reverse or offset insertion may destroy hardware. Hold the socket firmly during installation to avoid breaking pins. DO NOT bend or pull the cable within 2cm of soldering points on both ends.
- Signal loss occurs with all extension cables. Motherboard and hardware signal drive capability vary between devices. Our lab test results cannot guarantee identical performance on your system. Not recommended for users requiring perfect zero-loss signal.
- Electronic hardware including GPU and motherboard oxidizes and ages over time. Adding extension cables further reduces stability. Not compatible with equipment older than 4 years. Do not buy for aged systems.
- This product is for professional engineers and hardware testing purposes only. Not for other applications.
