Cisco IE-4010-4S24P - Industrial Ethernet Switch, 24-Port Gigabit PoE+, 4x Gigabit SFP Uplinks, Layer 2/3 - Cisco Refresh

The Cisco IE-4010-4S24P is a ruggedized 28-port Gigabit Industrial Ethernet switch built for factory automation, utility substations, smart-city networks, intelligent transportation systems, and outdoor enclosure deployments. It delivers 24x 10/100/1000 PoE/PoE+ copper ports plus 4x Gigabit Ethernet SFP uplinks in a fanless 1RU rack-mount chassis with no moving parts, rated for an extended operating range of −40°C to +75°C. Powered by Cisco IOS Software with the LAN Base feature set as default (upgradable to IP Services), this Layer 2/3 managed switch supports REP, PRP, HSR, and MRP ring redundancy plus PROFINET, EtherNet/IP CIP, Modbus TCP/IP, and IEEE 1588v2 PTP for time-sensitive industrial networks. Note: Power supplies are field-replaceable and sold separately — a compatible Cisco PWR-RGD module is required to operate this switch.

Cisco IE-4010-4S24P - Key Features & Benefits

• 24-Port Gigabit PoE+ for Industrial Endpoints: 24x 10/100/1000BASE-T RJ45 copper ports support IEEE 802.3af PoE (15.4W) and 802.3at PoE+ (25.5W) to power HD IP cameras, wireless access points, IP phones, badge readers, and SCADA endpoints; total system PoE budget scales up to 385W with dual 250W power supplies installed
• 4x Gigabit Ethernet SFP Uplinks: Four Gigabit Ethernet SFP uplink cages accept a wide range of multimode and single-mode fiber and copper SFP modules (sold separately), with industrial-temperature SFPs available for harsh-environment deployments — reach distance varies by SFP module installed
• Hardened for Harsh Environments: Fanless convection-cooled 1RU chassis with no moving parts, an extended −40°C to +75°C operating range, and IP30 ingress protection; hardened for vibration, shock, surge, and electrical noise immunity per IEEE 1613 (electric power stations), IEC 61850-3 (utility automation), NEMA TS-2 (transportation), and EN 50121-4 (railway signaling)
• Layer 2/3 Managed Switching with Cisco IOS: Full Cisco IOS feature set including VLANs, STP/RSTP/MSTP, EtherChannel, 802.1x port-based authentication, plus REP, PRP, HSR, and MRP ring redundancy; the default LAN Base license can be upgraded to IP Services to enable OSPF, EIGRP, RIPv2, Policy-Based Routing, HSRP, and MACsec
• Industrial Protocol & Time Sync Support: Native PROFINET v2, EtherNet/IP CIP messaging, Modbus TCP/IP memory maps, and IEEE 1588v2 Precision Time Protocol supporting both the Default Profile (manufacturing) and Power Profile (utility) for time-sensitive automation, substation, and process control networks

Cisco IE-4010-4S24P - Technical Specifications

• Part Number: IE-4010-4S24P (Cisco IE 4010 Series)
• Product Type: Layer 2/3 Managed Industrial Ethernet Switch
• PoE Copper Ports: 24x 10/100/1000BASE-T RJ45 • IEEE 802.3af PoE / 802.3at PoE+
• SFP Uplinks: 4x Gigabit Ethernet SFP uplink cages (SFP modules sold separately)
• Switching Bandwidth: 56 Gbps (full-duplex) • Forwarding Bandwidth: 28 Gbps (line-rate, non-blocking)
• Forwarding Rate: 41.67 Mpps with 64-byte packets (line-rate for all ports and packet sizes)
• PoE Budget: Up to 385W system-wide with dual PWR-RGD-AC-DC-250 power supplies
• Hardware: 1 GB DRAM • 128 MB onboard flash • SD slot for swap-drive replacement • Mini-USB and RJ-45 console
• Default Software: Cisco IOS LAN Base (upgradable to IP Services for L3 routing)
• Industrial Protocols: PROFINET v2 • EtherNet/IP CIP • Modbus TCP/IP • IEEE 1588v2 PTP (Default and Power Profiles)
• Ring Redundancy: REP • PRP • HSR • MRP ring • EtherChannel • Flexlink
• Operating Temperature: −40°C to +75°C (−40°F to +167°F)
• Form Factor: 1RU rack-mount • fanless • convection-cooled • no moving parts
• Dimensions: 1.75 x 17.5 x 14.0 in (4.45 x 44.5 x 35.6 cm) with 150W PSU installed
• Weight: 12.1 lb (5.46 kg) without power supply
• Compliance: IEEE 1613 • IEC 61850-3 • NEMA TS-2 • EN 50121-4 • EN 50121-3-2 • TAA • RoHS • IP30 • CE • UL/CSA 60950-1 • UL/CSA 62368-1 • UL 508
• Power Supplies (Sold Separately): PWR-RGD-AC-DC-H 150W • PWR-RGD-LOW-DC-H 150W • PWR-RGD-AC-DC-250 250W
• Condition: CiscoRefresh

Cisco IE-4010-4S24P - Frequently Asked Questions (FAQ)

• Are power supplies included with this switch?
  No — the IE-4010-4S24P chassis ships without a power supply by Cisco's design. To operate the switch you will need at least one compatible Cisco PWR-RGD module, sold separately: PWR-RGD-AC-DC-H (150W AC / high-voltage DC), PWR-RGD-LOW-DC-H (150W low-DC, 24–60V), or PWR-RGD-AC-DC-250 (250W AC / high-voltage DC). The chassis has two power supply bays for optional dual-PSU redundancy.
• How much PoE/PoE+ power is available to connected devices?
  The system PoE budget depends on which and how many power supplies are installed: 80W with a single 150W PSU, 200W with dual 150W PSUs, 180W with a single 250W PSU, 285W with one 250W + one 150W, and up to 385W with dual 250W PSUs. All 24 copper ports support both 802.3af PoE (15.4W) and 802.3at PoE+ (25.5W), but the combined load across all powered ports cannot exceed your installed PoE budget.
• What ships by default — Layer 2 only, or full Layer 3 routing?
  The IE-4010-4S24P ships with the Cisco IOS LAN Base feature set as default, which includes full Layer 2 switching, IPv4 static routing, REP/PRP/HSR/MRP redundancy, and industrial protocols (PROFINET, EtherNet/IP, Modbus TCP). Dynamic Layer 3 routing protocols such as OSPF and EIGRP, plus MACsec, require a separate IP Services license upgrade (Cisco P/N L-IE4000-RTU=), sold separately.

ATHQ is 100% US owned and operated, ensuring same-day shipping from our USA location. We pride ourselves in providing premium quality products at low prices! We always provide Satisfaction Guarantee to our customers. Please contact us if any issue arises.