|
SGI 18GB SCSI Hard Drive in Sled 013-3085-002 IBM DPSS-318350 Origin 200 2000 For Sale
|
 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
OEM Silicon Graphics (SGI) 18.3GB 80-pin SCA-2 hot-swap hard drive mounted in its factory sled carrier assembly (SGI Assy P/N 013-3085-002 Rev A / Sled P/N 013-2340-001 Rev B). The drive unit is an enterprise-grade IBM Ultrastar 7200 RPM Ultra3 SCSI hard drive (Model DPSS-318350 / SGI P/N 064-0141-002) manufactured in November 2000. It comes housed in the classic black perforated SGI carrier sled with locking front extraction handle, side retention rails, and light-pipe indicator, ready for direct slide-in mounting into vintage SGI Origin, Onyx, Octane, or Fuel drive bays. Offered pre-owned and untested for parts, repair, or retrocomputing preservation. PRODUCT DETAILS Drive Brand: IBM Ultrastar Drive Model Number: DPSS-318350 IBM Part Number: 07N4870 SGI Drive Part Number: 064-0141-002 (Rev A) SGI Assembly Part Number: 013-3085-002 (Rev A) SGI Sled / Carrier Part Number: 013-2340-001 (Rev. B 0017 944) Drive Serial Number: ZE1A0208 Date of Manufacture: November 2000 (NOV-2000) Country of Origin (Hard Drive): Made in Thailand (IBM Storage Products Thailand Ltd) Country of Origin (Drive Controller PCB): Assembly Made in Philippines Storage Capacity: 18.3 GB (18 GB nominal) Spindle Speed: 7,200 RPM Interface: 80-Pin SCA-2 (Ultra3 SCSI / Ultra160 LVD/SE Hot-Swap) Form Factor: 3.5" Low Profile inside SGI proprietary slide-in carrier
Silicon Graphics (SGI) Origin 200 / Origin 2000 / Origin 2100 Silicon Graphics (SGI) Origin 300 / Origin 350 / Origin 3000 Silicon Graphics (SGI) Onyx 2 / Onyx 3000 Silicon Graphics (SGI) Octane / Octane 2 and Fuel workstations accepting 80-pin SCA drive sleds CONDITION & TESTING DISCLOSURE Pre-owned vintage hardware in good physical condition. SGI caddy, front perforated ventilation bezel, grounding fingers, and drop-down pull latch are intact and latch securely. 80-pin SCA gold backplane interface connector and PCB surface-mount components show no physical damage, broken pins, or lifted solder pads. Testing Status: Untested. Due to lacking an SGI SCA backplane test bench, this unit has not been powered on or tested for read/write integrity. Sold Strictly AS-IS / For Parts or Not Working. Please review all high-resolution photos for exact cosmetic condition, labels, and revisions.
SHIPPING & PACKAGING  |
|
|
|
