2-in-1 Wall Mount for Starlink V5 Router and Power SupplyThis wall mount holds the Starlink V5 router and its original power supply
together on one bracket. The router sits in the upper bracket and the power
brick slides into the lower section, which lifts both off the desk or shelf and
keeps the cables tidy. The open frame leaves the router and the power supply
exposed to the air rather than boxing them in.Features✔ 2-in-1 design: one bracket carries the router and the power supply
✔ Frees up desk, shelf and floor space at home, in the office, an RV or camper
✔ Open frame around the router and the power supply for airflow
✔ Built-in cable slots and a wrap area keep the cords neat and tangle-free
✔ Pre-drilled screw holes in both brackets for a straight, level fit
✔ Adjustable two-piece design: brackets can be mounted together or apart
✔ Includes 4 screws, 4 wall anchors and 2 cable router: Starlink V5 Router UTR-251
Compatible power supply: Original Starlink V5 power supply
Not compatible with: Starlink Gen 3, Gen 4, Standard 4X and High Performance
routers
Mounting: Wall mount, screws and wall anchors included
Upper bracket size: 167 x 80 mm / 6.5 x 3.1 in
Lower bracket size: 83 x 40 mm / 3.27 x 1.57 in
Material: ABS plastic
Mounting hardware: 4 x screws, 4 x wall anchors
Cable management: 2 x cable straps plus built-in cable slots
Suitable wall types: Wood, gypsum board, concrete
Colour: WhiteWhat's in the Box1 x Upper bracket for the router
1 x Lower bracket for the power supply
4 x Wall screws
4 x Plastic wall anchors
2 x Cable straps
1 x Installation guideInstallationTwo mounting options are shown in the guide.
Option 1 - combined: engage the bottom tabs of the upper bracket with the
mating interface of the lower bracket, then fit the assembled unit to the wall.
Option 2 - separate: fit the upper and lower brackets to the wall separately, so
you can place the router and the power supply where you want them.
Both options require drilling the marked holes and fitting the supplied wall
anchors. A drill and a screwdriver are needed and are not included.ImportantCheck your router model before ordering. This bracket is made for the Starlink
V5 Router UTR-251 and its original power supply. Confirm that the wall is
structurally sound and suitable for the supplied anchors before drilling. The
bracket is made of ABS plastic, so do not overtighten the screws.