TECHTONGDA® 110V 3D Printing Plastic Filament Winder – Technical Specifications TECHTONGDA® 110V 3D Printing Plastic Filament Winder Product Overview

This machine is specially designed for the 3D printing material production line and is used in conjunction with the extruder. It is used to uniformly and neatly roll the extruded PLA/ABS/PETG and other plastic filaments onto standard material trays, avoiding problems such as wire knotting, loose winding, skew winding, and stretching deformation of different thicknesses.

Product Parameters Rated Voltage110V Rated Power120W Cable Arrangement MethodReciprocating automatic optical cable arrangement Speed Control MethodVariable resistor speed control, synchronized with the extruder speed Appropriate Loading TrayInner diameter 52mm (2.05in) Reeling Speed0 - 18m/min, adjustable continuously Product Features Compatibility with Reels & Wires

Compatibility with Reels of Different Specifications: Equipped with an adjustable reel holder, it adapts to reels with various inner diameters and widths, flexibly meeting the winding demands of different specifications.

Wide Compatibility with Various Wires: It is compatible with multiple common 3D printing consumables such as PLA, ABS, PETG, TPU and TPE, satisfying different printing demands.

Precise Length Counting & Stable Tension

Precise Length Counting Function: Built with a meter counting system, it can accurately measure and set the winding length, and will automatically stop when the set value is reached, facilitating standardized packaging and inventory management.

Stable and Controllable Tension: It features a constant tension control function, which automatically adjusts the rotating speed during the winding process to maintain balanced wire tension, preventing the wire from being thinned due to excessive tension or getting loose due to insufficient tension.

Easy Operation with One‑Touch Start

Fitted with an intelligent control system, it has a simple and intuitive operation interface. After parameter setting, it can be started with one key to automatically complete the whole winding process, reducing manual intervention.

Precautions

• 1. After using the machine, be sure to turn off the power and air supply, and perform cleaning and maintenance.
• 2. Do not place tools or other items inside or on top of the machine.
• 3. Always turn off the power and air supply when inspecting the machine.
• 4. If a sealing button malfunctions, to help users check whether the left and right sealing buttons are working properly, you may disable the left or right sealing button in the settings page. After troubleshooting, be sure to restore the settings. During normal operation, disabling either the left or right sealing button is strictly prohibited — the machine must not be operated with only one button active!
• 5. Do not place hands or any part of the body into the machine or near any moving area while the machine is running or before it has come to a complete stop.
• 6. In case of any abnormal condition such as material jamming, press the emergency stop immediately. Only after the machine has come to a complete stop and the power is disconnected may you use proper tools to clear the jam. Never attempt to handle it with bare hands.

Operating Instructions

• 1. Turn on the main power switch, and the power indicator light on the control panel will light up.
• 2. Slowly rotate the speed adjustment knob, gradually increasing from low speed.
• 3. Match the discharge speed of the front extruder, and keep the winding speed and the discharge speed in sync.
• 4. The equipment will automatically unwind the wire, and no manual intervention is required throughout the process.
• 5. When stopping, first set the speed adjustment knob to the 0 position, then turn off the power switch. After the equipment completely stops, cut the wire and remove the finished material tray.

Product Presentation & Details Items Included Package Contents (021069)

• 110V 3D Printing Plastic Filament Winder × 1

Shipping & Handling

• Standard shipping: Free shipping applies to lower 48 United States via UPS Ground or USPS. Extra charges for Alaska, Hawaii, PR, Guam, VI, APO/FPO, PO boxes & international.
• Processing time: 1‑3 business days after payment clearance (Mon‑Fri excluding holidays).
• Address responsibility: Ensure address compatible with UPS/USPS; extra fees due to incorrect/undeliverable address borne by buyer.
• Shipping damage: Contact support immediately with photo evidence for resolution.
• Sales tax / customs: Not included; buyer responsible for any applicable duties or taxes.

Return & Refund Policy

• Return period: 30 days from delivery, unused with original packaging. Partial refund may apply for opened/damaged items.
• Buyer‑initiated returns: Return shipping + original shipping cost deducted; 15% restocking fee applies.
• Seller error: Full refund including shipping charges.
• RA required: Contact for Return Authorization number before return.
• Defective products: Provide photo/video evidence; replacement or refund for verified defects.

Warranty & Technical Support

• Warranty period: 6 months coverage for mechanical components (consumables excluded). Technical support remains available beyond warranty.
• Warranty shipping: Buyer responsible for shipping to service center; seller covers return shipping after repair.
• Customer support: Contact us for any operational concerns; positive response appreciated.

On Oct 12, 2026 at 01:33:19 PDT, seller added the following information: