Aqua Computer flow sensors are easily integrated into your water cooling loop and allow continuous flow monitO-ring. Coolant flowing through the sensor drives a rotor/impeller, a contactless magnetic sensor system detects the rotation speed. Each sensor is calibrated for optimum bearing play to achieve minimum operation noise. The sensor delivers reliable readings over a wide range of flow rates between 40 l/h and 1000 l/h (approximately 10 to 260 US liquid gallons per hour) and is therefore perfectly suited for most water cooling systems. Due to a symmetrical construction, the flow direction is irrelevant. Furthermore, the sensor may be installed in any orientation. Due to its low flow resistance, this sensor is a perfect match for high flow water cooling systems. The connection threads are G 1/4 and can be used with virtually any tube dimensions. For sensor installation, two screws are included in delivery. Compatibility list: aquaero 6 XT / PRO / LT (53145, 53146, 53206, 53234, 53250, 53251, 53253, 53262, 53263) aquaero 5 XT / PRO / LT (53089, 53090, 53095, 53125, 53249, 53252) aquaero 4.00 / 3.07 (53030, 53031, 53035, 53045, 53048, 53064, 53075, 53076) aquastream ULTIMATE (41108) aquastream XT (41059, 41060, 41061) D5 NEXT (41118) farbwerk 360 (53279) poweradjust 3 (53166, 53167) poweradjust 2 (53082, 53083) poweradjust (53049, 53054) aquaduct 240 Pro mark III (11213) aquaduct 360 eco+ (11212, 11233) cuplex kryos NEXT with VISION VISION connection terminal for kryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) QUADRO (53256) OCTO (53286) Technical details: Dimensions: ca. 51 x 42 x 30 mm Connection threads: G 1/4 For flow signal evaluation, a device with flow sensor input (see compatibility list) is required and is not included in delivery!