Power supply not included Supports 12~57V DC power supply (Maximum current 4 amps)
52V Power adapter
This item do not include the power adapter, you need to buy an extra power adapter according to your requirement.
So it only suitable for PoE professional customers.
24V POE
If your camera is with word “12V/PoE” as this picture shows, then please select 48V(or 52V)Power Adapter, do not select 12V Power Adapter.
Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V PoE Ethernet port:
This is an Passive Power Over Ethernet of 8port 10 / 100Mbps-T Ethernet switches, including 6 unsolicited PoE Ethernet ports and 2Uplink ports.DC port apply 12~55V power supply adapter(not included),any one of the 6 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because "1~6" port using 4,5,7,8 pin as power transfer, Pleasedo not connect any "NONE PoE gigabit ethernet device and Uplink device" on "1~6" port, this will damage your device.
Gigabit(10/100/1000Mbps) ethernet devicePlease do not access "Power Link port" this will damage your device.
Features:
- 8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 6-Ports PoE function
- Support EXTmode, max Network Cable length to 250 meters.
- Midspan Mode-B Unsolicited Power(4,5+/7,8-)
- Supports 12~57V DC power supply
- Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
- Full/half duplex transfer mode for each port.
Specification:
ALL Port: Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with4 pairs UTP Cat5/5e/6 cable。 Power LinkPort1-6: any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs)
Power LED LED ON: power on. LED OUT: power off GreenLight LINK/ACT LED ON Indicates the port is connected to a network device and has been started LED OFF Indicates that this port is not connected to a network device or has not been started
Standard
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full-Duplex flow control
Protocol
CSMA/CD Ethernet
Data TransferRate
Ethernet: 10Mbps (Half Duplex)20Mbps (Full Duplex)
Fast Ethernet: 100Mbps (Half Duplex)200Mbps (Full Duplex)
Network Media(Cable)
10Base-T(EXTEND mode): UTP category 5e, 6 cable (maximum 250m) EIA/TIA-568 100Ω STP (maximum 250m)
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
PoE Power on RJ45
Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8
DC Output: 9-55V, Per port Max 1A,
Number of Ports
8 x 10/100Mbps Auto-Negotiation RJ45 ports with 6PoE enabled (port-1~ port-6)
Power Input
Supports INPUT 12-57V DC power supply
Power DC port 5.5 x 2.1mm,
inside positive (+) outside negative (-)
Power Consumption
3.2Watts (max. no PD connected)
According to the actual power consumption of equipment
Temperature
Operation Temperature:0 ~40℃(32 ~104℉)
Storage Temperature: -40 ~70℃(-40 ~158℉)
Humidity
Storage Humidity 5%~90% non-condensing, OperatingHumidity 10%~90% non-condensing
Product Dimensions
140mm W x 65mm D x 28mm H
RAM Register Capacity
64K bytes per device
MAC Address List
1K entries per device
Frame Forward Rate
10Mbps Ethernet: 14880pps/Port
100Mbps Ethernet: 14880pps/Port
Item Included:
DSLRKIT MID6P2UE8pots 6PoEUnsolicited(Passive)PoE switch x1
(Power supply not included)
12 Months Warranty from the date of purchase.
