Description
Gigabit/2.5G Dual Ethernet Industrial Computer based on Raspberry Pi CM5 (NOT included), Supports 4K Display Output and 4G / 5G module, Suitable for all variants of Compute Module 5Dual Ethernet Industrial Computer
based on Raspberry Pi CM5

Designed for Raspberry Pi Compute Module 5

* the Raspberry Pi CM5 is NOT included.Version Options

IPCBOX-CM5-A
Dual Ethernet ports, onboard 4 × RS485 interfaces

IPCBOX-CM5-B
Dual Ethernet ports, onboard 2 × RS485 + 2 × RS232 interfaces

All versions come with an aluminum alloy case and power supply adapter,
please refer to the package content for the detailed part list.

SpecificationsCM5 socketSuitable for all variants of Compute Module 5Networking1000M Ethernet RJ45 port × 1
2500M Ethernet RJ45 port × 1USBUSB 3.2 Gen1 port × 1USB 2.0 port × 3VideoHDMI interface × 1, supports 4K display outputM.2M.2 M KEY (PCIe Gen2/3 × 1, 2230 / 2242)M.2 B KEY, supports connecting 4G / 5G communication moduleStorageTF card socket for Compute Module 5 Lite (without eMMC) variantsSerial InterfaceOptions for 2 × RS485 + 2 × RS232 version or 4 × RS485 version1 × CAN with up to 1Mbps communication rateDigital Input/Output2 × digital outputs + 2 × digital inputsAudio3.5mm audio jack (microphone support), PH2.0 speaker headerFan header5V, 4PIN JST-SH PWM fan headerBuzzer1-ch controllable buzzerOtherOnboard EEPROM and encryption chipPower Input7V ~ 36V wide voltage range screw terminal, 5V 5A Type-C portDimensions136.00 × 92.00 × 39.50 (mm)What's the differencesCM5 Base BoardInterface count and specificationsPoEGigabit
ETH40PIN
GPIOPCIeUSB①MIPIHDMIRTCFan
Header②Power
InputFeatures
NANO A√3.0×1×2SH1.0√5VCM5 sized
NANO B×1√16PIN PCIe3.0×1×2√SH1.0√5VCM5 sized
mini Base A×1√16PIN PCIe3.0×2
2.0×2×2×2ML/CR1220√5Vmini size
mini Base B×1√M.2 M KEY3.0×2
2.0×2×2×2ML/CR1220√5Vmini size, onboard EEPROM and encryption chip
Mini Dual Gigabit×2√3.0×1SH1.0√5Vdual ETH
Dual ETH1G ×1
2.5G ×1√M.2 M KEY3.0×1
Dual ETH 4G/5G1G ×1
2.5G ×1√M.2 M KEY3.0×2×2×2ML/CR1220√7V~36Vdual ETH and 4G/5G support
PoE Base√×1√M.2 M KEY3.0×2
Raspberry Pi official③×1√M.2 M KEY3.0×2×2×2ML/CR1220√5VOfficial IO base board
IPCBOX-CM51G ×1
2.5G ×1M.2 M KEY3.0×1
2.0×3×1SH1.0√7V~36Vdual ETH
4G/5G support
RS485/RS232
Encryption chip
EEPROM
CAN
digital inputs
digital outputs
audio
buzzerNote① USB 3.0 is equivalent to USB 3.2 Gen1.
② Unless otherwise specified, the Fan header usually is JST-SH type connector.
③ There's PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature.
Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).
Connecting with Compute Module 5

standard CM5 socket suitable for Compute Module 5 Lite / eMMC series module

* for reference only, please refer to the package content for detailed part list

4G / 5G module compatibility

compatible with communication modules with M.2 B KEY interface

* An additional communication module is required to enable 5G/4G/3G/2G cellular network function, recommended:SIM7600G-H-M.2,SIM8260G-M2, andSIM8262E-M2.

Supports connecting to M.2 NVMe Drive

Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive

* for reference only, please refer to the package content for detailed part list

Applicable M.2 drive sizes
NVMe Drive Slot Support

* Only supports the NVMe Protocol Solid State Drives.

More rich interfaces
Precise cut-out with clear label

each cut-out is completely aligned with the connector

Heat Dissipation Design

Aluminum alloy case enables large-area heat conduction and dissipation, combined with heat sink fins, better heat dissipation

supports Rail mounting and VASE mounting

Reserved Rail-mount buckle and VASE mounting holes for more convenient installations

* for reference only, comes with rail-mount buckle and is compatible with VESA mounting.

What's On Board

1. CM5 socket
   suitable for all variants of Compute Module 5
2. M.2 M KEY
   supports 2242 / 2230 NVMe Solid State Drives or AI modules
3. Nano SIM card slot
4. TF card slot
   for connecting a TF card with pre-burnt system (Lite variant ONLY)
5. Dual USB 2.0 ports
   standard USB 2.0 ports
6. BOOT button
   press before powering on to enter the burning mode
7. PSW power button
   Long press to force power off, short press to soft power off or on
8. M.2 B KEY
   supports connecting 4G/5G communication module
9. Buzzer
10. PH2.0 speaker header
    supports connecting to8Ω 5W speaker
11. Programming port
    used for eMMC burning
12. 3.5mm Jack
    supports audio input and output

13. HDMI interface
    supports 4K outputs
14. USB ports
    1 × standard USB 2.0 port, 1 × USB 3.2 Gen1 Type-A port with up to 5Gbps rate
15. DC power screw terminal
    supports DC 7V ~ 36V power supply
16. Indicators
17. 1000M Ethernet RJ45 port
    supports 10M / 100M / 1000M network connections
18. 2500M Ethernet RJ45 port
    supports 10M / 100M / 1000M / 2500M network connections
19. RTC Batt header
    for connecting with compatibleRTC Battto power the RTC chip
20. Multi-function interface
    1 × CAN interface with up to 1Mbps and 2 × digital outputs + 2 × digital inputs
21. RS485 / RS232 interface
    Options for 2 × RS485 + 2 × RS232 version or 4 × RS485 version
22. 120R Jumper
    RS485 and CAN terminal resistor selection (No function for RS232)

Application Example

Suitable for Raspberry Pi applications in remote communication or other industrial situations

* for reference only, thedisplay, keyboard, and mouse are NOT included, please purchase separately.

How to installOutline dimensions
About Compute Module 5Newly upgraded, more powerful

• Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
• More options for RAM (2GB / 4GB / 8GB / 16GB)
• More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
• Faster eMMC Flash storage, up to 200 Mbps data rate
• Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
• Adopts B to B connectors, most compatible with Compute Module 4
• Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
• Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules

Resources & ServicesPackage Content

Weight:0.697 kg

IPCBOX-CM5-A

1. IPCBOX-CM5-A metal case x1
2. CM5-IPC-BASE-A-4RS485 baseboard x1
3. OPTIONS12V 4A power x1
4. Power adapter cable 15cm x1
5. Black nylon spacers x4
6. Screws pack x1
7. Screwdriver x1
8. 6PIN 3.5mm pitch double-layer terminal block x1
9. 4PIN 3.5mm pitch double-layer terminal block x1
10. Rail-mount buckle x1
11. Pink thermal tapes x1

IPCBOX-CM5-B

1. IPCBOX-CM5-B metal case x1
2. CM5-IPC-BASE-A-2RS485 baseboard x1
3. OPTIONS12V 4A power x1
4. Power adapter cable 15cm x1
5. Black nylon spacers x4
6. Screws pack x1
7. Screwdriver x1
8. 6PIN 3.5mm pitch double-layer terminal block x1
9. 4PIN 3.5mm pitch double-layer terminal block x1
10. Rail-mount buckle x1
11. Pink thermal tapes x1